HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

Detailed Information
Detailed information for this operation is shown in the following table.
Table 230 Detailed information for Suspend Pair operation
DescriptionItem
The CU and LDEV numbers of the connected volume in the split (suspended) pair.VOL(CU:LDEV)
The LDEV number of the paired volume in the split (suspended) pair.PairVOL(LDEV)
The volume type of the connected volume. M-VOL: Main volume, R-VOL: Remote
volume
Type
The SSB[F/M=FB] option setting. Enable: Notified, Disable: Not notifiedSSB
The suspend type set.
M-VOL Failure: Main volume write is disabled
R-VOL: Main volume write is enabled
Kind
The suspend range set. This value is output when the asynchronous pair is split only.
Volume: Volume (specified TrueCopy for z/OS(R) Asynchronous pairs only are
suspended)
Group: Group (all other TrueCopy for z/OS(R) Asynchronous pairs in the same
consistency group as the specified pairs are suspended)
Range
The setting of unreflected data handling. This value is output when the asynchronous
pair is split only.
Drain, Purge
Mode
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of split pairs.Num. of Pairs
TrueCopy (TC) z/OS function248