HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

DescriptionItem
Indicates whether to transfer timestamp of the host to the remote volume when the pair
is created. This value is output when the asynchronous pair is created only. When the
asynchronous pair is created, a hyphen (-) is output.
Enable: Transfer, Disable: Do not transfer.
TS
The resume range set (the range to restore the asynchronous pair). This value is output
when the asynchronous pair is restored only.
Volume: Volume (appropriate TrueCopy for z/OS(R) Asynchronous pairs only)
Group: Group (all suspended TrueCopy for z/OS(R) Asynchronous pairs in the
consistency group)
Range
The error level set (handling in case of trouble).
This value is output when the asynchronous pair is restored only.
Volume: Volume (appropriate TrueCopy for z/OS(R) Asynchronous pair only)
Group: Group (all suspended TrueCopy for z/OS(R) Asynchronous pairs in the
consistency group)
Error Level
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of restored pairs.Num. of Pairs
Script operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,00:00,[TC z/OS(R)],Script Operation,Run,,Normal end,
Seq.=xxxxxx
+FileName=script.spt
[TC z/OS]
TrueCopy z/OS function (for IBM z/OS)
Script Operation
Script Operation operation
Run
Run is selected as the parameter. This operation uses the following parameters, as shown in the
following table.
Table 228 Parameters for Script operation
DescriptionParameter
The script has been executed.Run
The script has been suspended.Stop
Normal end
The operation has ended normally.
Seq.=xxxxxx
TrueCopy (TC) z/OS function246