HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

DescriptionItem
The delete range set. This value is output when the asynchronous pair is deleted
only.
Volume: Volume (appropriate TrueCopy for z/OS(R) Asynchronous pairs only)
Group: Group (all suspended TrueCopy for z/OS(R) Asynchronous pairs in the
consistency group)
Range
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of deleted pairs.Num. of Pairs
Resume Pair operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,00:00,[TC z/OS(R)],Resume Pair,,Normal end,Seq.=xxxxxx
+{M-VOL(CU:LDEV), R-VOL(LDEV),Fence Level,Copy Pace,Priority,TS,Range, Error Level,Result}=
-{0x00:0x00,0xFF,Never,15,256,Group,Group,Normal End},{0x00:0x01,Never,15,256,-,Group,Group,
Normal End},(snip)
-(snip), Num. of Pairs=xx
[TC z/OS]
TrueCopy z/OS function (for IBM z/OS)
Resume Pair
Resume Pair operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 227 Detailed information for Resume Pair operation
DescriptionItem
The CU number and the LDEV number of the main volume in the restored pair.M-VOL(CU:LDEV)
The LDEV number of the remote volume in the restored pair.R-VOL(LDEV)
The fence level set (the condition that MCU rejects the write operation to the primary
volume).
Never: No condition, Data: S-VOL data, Status: S-VOL status
Fence Level
The initial copy speed set (the number of tracks you can copy at a time by restoring).Copy Pace
The priority of the restoring operation set (scheduling order).Priority
XP Audit Log reference guide 245