HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

0x00
The operation uses the following parameters, as shown in the following table.
Table 225 Parameters for Delete CTG operation
DescriptionItem
The number of the deleted consistency group.0x00 to 0x7F
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Delete Pair operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,00:00,[TC z/OS(R)],Delete Pair,,Normal end,Seq.=xxxxxx
+{VOL(CU:LDEV),PairVOL(LDEV),Type,Mode,Range,Result}=
-{0x00:0x00,0xFF,M-VOL,Normal,Group,Normal End},{0x00:0x01,Normal,Group,Normal End},
{0x00:0x02,Normal,Group,Normal End},(snip)
-(snip), Num. of Pairs=xx
[TC z/OS]
TrueCopy z/OS function (for IBM z/OS)
Delete Pair
Delete Pair operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 226 Detailed information for Delete Pair operation
DescriptionItem
The CU number and the LDEV number of the volume on the primary site in the deleted
pair.
VOL(CU:LDEV)
The LDEV number of the paired volume in the deleted pair.PairVOL(LDEV)
The volume type of the connected volume.
M-VOL: Main volume, R-VOL: Remote volume
Type
The delete mode.
Force: Forced deletion, Normal: Normal deletion, All: All deletion
Mode
TrueCopy (TC) z/OS function244