HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

NOTE:
Only the storage administrator can download the audit log file, and the Audit Log Administrator role
needs to be set to Modify or View.
1. Log on as a storage administrator and open the XP Remote Web Console's main pane.
2. Click the Audit button in the top right corner of the main pane:
Figure 3 Audit button
• Audit:Normal displays when the number of saved lines in the audit log file is below the
threshold.
• Audit:Warning displays yellow when the number of saved lines in the audit log file is above
the threshold, but the data is still being saved.
• Audit:Wraparound displays red when the number of saved lines in the audit log file has ex-
ceeded the maximum, and data is being lost.
3. Click a destination for the file and click Save.
NOTE:
It can take about one to five minutes to download the audit log file.
Using the Syslog tab
NOTE:
The Syslog tab is a HP-UX feature. For other operating systems (such as Windows), contact your HP
account representative.
NOTE:
Only the storage administrator can download the audit log file, and the Audit Log Administrator role
needs to be set to Modify or View.
To download the audit log file using the Syslog tab:
1. Log on as a storage administrator and open the XP Remote Web Console main pane.
2. Click the Syslog tab near the top of the main pane as shown in the following figure.
Introduction24