HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

Add Pair operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00, [TC z/OS(R)],Add Pair,,Normal end,Seq.=xxxxxx
+{M-VOL(CU:LDEV),R-VOL(LDEV),S/N,SSID,ControllerID,Type, Initial Copy, Fence Level,
Copy Pace, Priority,Diff,CFW,DFW,TS,CTG, Error Level,Result}=
-{0x00:0x00,0xFF,99999,0x0004,4,Async,Entire,Never,15,032,Auto,Only M-VOL,-,–,0x00,Group,
Normal End}, (snip)
-(snip), Num.of Pairs=xx
[TC z/OS]
TrueCopy z/OS function (for IBM z/OS)
Add Pair
Add Pair operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 219 Detailed information for Add Pair operation
DescriptionItem
The CU number and the LDEV number of the volume specified to the main volume
when the pair is created.
M-VOL(CU:LDEV)
The LDEV number of the volume specified to the remote volume when the pair is created.R-VOL(LDEV)
The serial number of the device.S/N
Indicates SSID.SSID
The controller ID.Controller ID
The update copy mode set; Sync: Synchronous mode, Async: Asynchronous modeType
The initial copy mode set.; Entire: All copy, None: No copyInitial Copy
The fence level set (the condition that MCU rejects the write operation to the main
volume.)
Never: No condition, Data: S-VOL data, Status: S-VOL status
Fence Level
The initial copy speed set (the number of tracks you can copy at a time).Copy Pace
The priority of the initial copy operation set (scheduling order).Priority
The unit of the differential management set: Auto, Cylinder, TrackDiff
Indicates whether the setting to copy the CFW data to the remote volume is enabled
or not. Only M-VOL: Copy to main volume only is enabled
Copy To R-VOL: Copy to main and remote volume is enabled
CFW
TrueCopy (TC) z/OS function238