HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

DescriptionItem
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of split pairs.Num. of Pairs
Pairsplit-S operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[CAXP],Pairsplit-S,,Normal end,Seq.=xxxxxx
+{P-VOL(Port-G-ID-LUN), S-VOL(Port-G-ID-LUN),Type,Force,Range,Result}=
-{1A-0x00-0x000, 1B-0x00-0x000,P-VOL,No,Group,Normal End},{1A-0x00-0x001,No,Group,
Normal End},
+{1A-0x00-0x002,No,Group,Normal End},(snip)
-(snip), Num. of Pairs=xx
[CAXP]
Continuous Access XP function
Pairsplit-S
Pairsplit-S operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 217 Detailed information for Pairsplit-S operation
DescriptionItem
The port number, host group number and LUN of the primary volume in the restored
pair sequentially.
P-VOL(Port-G-ID-LUN)
The port number, host group number and LUN of the primary volume in the restored
pair sequentially.
S-VOL(Port-G-ID-LUN)
The volume type of the volume on the primary site.
P-VOL: Primary volume, S-VOL: primary volume
Type
The setting content of forced pair deletion.
Yes: Pair is deleted even when MCU cannot communicate with RCU
No: Pair is deleted when MCU can change the pair status to SMPL only
Force
The delete range set. This value is output when the asynchronous pair is deleted only.
Group: Group (all asynchronous pairs in the consistency group),
CT: C/T (asynchronous pairs which the consistency status of the consistency group
is group and the pair status is PSUE)
LU: LU (specified asynchronous pairs only)
Range
XP Audit Log reference guide 235