HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 214 Detailed information for Paircreate operation
DescriptionItem
The port number, host group number and LUN of the volume specified to the primary
volume when the pair is created sequentially.
P-VOL(Port-G-ID-LUN)
The port number, host group number and LUN of the volume specified to the primary
volume when the pair is created sequentially.
S-VOL(Port-G-ID-LUN)
The serial number of the device.S/N
The path group ID or SSID.
When the path group ID is default setting, the output is Default.
ID
The controller ID.Controller ID
The update copy mode set.
Sync: Synchronous mode, Async: Asynchronous mode
Type
The initial copy mode set.
Entire: All copy, None: No copy
Initial Copy
The fence level set (the condition that MCU rejects the write operation to the primary
volume).
Never: No condition, Data: S-VOL data, Status: S-VOL status
Fence Level
The initial copy speed set (the number of tracks you can copy at one time).Copy Pace
The priority of the set initial copy operation (scheduling order).Priority
The unit of the differential management set.
Auto, Cylinder, Track
Diff
The consistency group number of the consistency group (CT group) that the created
pair belongs to. This value is output when the asynchronous pair is created only.
CTG
The error level set (handling in case of trouble).
This value is output when the asynchronous pair is created only.
Group: Group (suspended by consistency group),
LU: LU (appropriate LU only is suspended)
Error Level
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of created pairs.Num. of Pairs
Continuous Access XP function232