HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

Detailed information for this operation is shown in the following table.
Table 210 Detailed information for Change CTG Option operation
DescriptionItem
The consistency group number of the consistency group (CT group) where the
option is changed.
CTG
The value set to the monitoring time of transfer to the side file. The unit is second.Offloading(s)
Indicates whether the inflow control to the cache is enabled or disabled.
Enable: Setting is enabled, Disable: Setting is disabled
Inflow Control
The setting value for Time Out (Copy Pending). The unit is minute. When Time
Out (Copy Pending) is set to 0 (zero), None is output.
Copy Pending(min.)
The setting value for Time Out (RCU ready). The unit is minute. When Time Out
(RCU ready) is set to 0 (zero), None is output.
RCU Ready(min.)
Change Option operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00, [CAXP], Change Option,,Normal end,Seq.=xxxxx
+{ Max Initial Copy,Path Blockade Watch(s),Path Blockade SIM Watch(s) }={128,45,70}
+{CU,Service SIM,PPRC Support,SCP Delay Time(s)}=
-{0x00,Not Report,Yes,600},{0x01,Not Report,Yes,600},{0x02,Not Report,Yes,600},
{0x03,Not Report,Yes,600},{0x04,Not Report,Yes,600},
(snip)
-(snip), Num. of CUs=64
[CAXP]
Continuous Access XP function
Change Option
Change Option operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 211 Detailed information for Change Option operation
DescriptionItem
The maximum number of initial copy operations set.Max Initial Copy
The path blockade watch period set. The unit is second.Path Blockade Watch(s)
The path blockade SIM watch period set..The unit is second.Path Blockade SIM Watch(s)
The CU number of the connected CU.CU
XP Audit Log reference guide 229