HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

Change Async Option operation

user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[CAXP],Change Async Option,,Normal end,Seq.=xxxxx

+{CLPR,Rate(%),Delay Start(%),Delay Increase(%)}={00,050,030,040}

[CAXP]

Continuous Access XP function

Change Async Option

Change Async Option operation

Normal end

The operation has ended normally.

Seq.=xxxxxx

Sequence number of the log entry (000000 to 999999)

Detailed Information

Detailed information for this operation is shown in the following table.

Table 209 Detailed information for Change Async Option

DescriptionItem

The CLPR number.CLPR

The value set to the pending update data rate.Rate(%)

The value set to the I/O Delay Start value (the threshold that the inflow control

of asynchronous copy starts).

Delay Start(%)

The value set to the I/O Delay Increase value (the threshold that the inflow

control of asynchronous copy increases).

Delay Increase(%)

Change CTG Option operation

user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[CAXP],Change CTG Option,,Normal end,Seq.=xxxxx

+{CTG, Offloading(s),Inflow Control,Copy Pending(min.),RCU Ready(min.)}=

{0x00,090,Enable,05,05}