HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

30 Continuous Access XP function
Add CTG operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[CAXP],Add CTG,,Normal end,Seq.=xxxxx
+{CTG,Path,Offloading(s),Inflow Control,Copy Pending(min.),RCU Ready(min.)}=
{0x00,Fibre,090,Enable,05,05}
[CAXP]
Continuous Access XP function
Add CTG
Add Consistency Group (CTG) operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 208 Detailed information for Add CTG operation
DescriptionItem
The consistency group number of the consistency group (CT group) newly re-
gistered.
CTG
The channel type of path interface.
Fibre: Fibre channel
Path
The value set to the monitoring time of transfer to the side file. The unit is second.Offloading(s)
Indicates whether the inflow control to the cache is enabled or disabled.
Enable: Setting is enabled, Disable: Setting is disabled
Inflow Control
The setting value for Time Out (Copy Pending). The unit is minute. When Time
Out (Copy Pending) is set to 0 (zero), None is output.
Copy Pending(min.)
The setting value for Time Out (RCU ready). The unit is minute. When Time Out
(RCU ready) is set to 0 (zero), None is output.
RCU Ready(min.)
XP Audit Log reference guide 227