HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

Update Port WWN operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[PFC],Update Port WWN,,Normal end,Seq.=xxxxx
+{Mode,WWN, Name,Priority}=[{Add ,0xXXXXXXXXXXXXXXXX,XXXXXXXXXXXXXXXX,Non-Prio},
++Port=[1A,3A],Num. of Ports=2],Num of WWNs=1
[PFC]
Performance Control function
Update Port WWN
Update Port World Wide Name (WWN) operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 205 Detailed information for Update Port WWN operation
DescriptionItem
The operation executed.
Add WWN: New registration of WWN (the host bus adapter is subject to
monitoring)
Delete WWN: Deletion of WWN (the host bus adapter is not subject to monitoring)
Mode
Indicates WWN of the host bus adapter registered or deleted. WWN is a 16-digit
number in the hexadecimal format.
WWN
The SPM name of the host bus adapter registered or deleted.PPC Name
The attribute of the registered host bus adapter.
Prio: Prioritized WWN, Non-Prio: Non-prioritized WWN
This value is output only when the host bus adapter (WWN) is registered.
Priority
The name of the port to which the host bus adapter is registered.Port
The number of ports to which the host bus adapter is registered.Num. of Ports
The number of WWNs of the registered or deleted host bus adapters.Num. of WWNs
Update PPCGrp operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[PFC],Update PPCGrp,,Normal end,Seq.=xxxxx
+{UpdateMode, Group,Priority,Upper Limit,Mode}=[{Add WWN,XXXXXXXXXXXXXXXX,Non-Prio,
XXXXXXXX,IOPS},
++WWN=[0xXXXXXXXXXXXXXXXX,0xXXXXXXXXXXXXXXXX],Num. of WWNs=2],
+Num. of PPC Group=1
[PFC]
XP Audit Log reference guide 223