HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

Set All Prio WWN operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,00:00,[PFC],Set All Prio WWN,,Normal end,Seq.=xxxxx
+{AllPriority,Threshold,Mode}={Enable,XXXXXXXX,IOPS}
[PFC]
Performance Control function
Set All Prio WWN
Set All Priority (Prio) World Wide Name (WWN) operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 201 Detailed information for Set All Prio WWN operation
DescriptionItem
The setting status of the All Thresholds value in the WWN tab.
Enable: All Thresholds value is set
Disable: All Thresholds value is cancelled
AllPriority
The All Thresholds value set.
This value is output only when the All Thresholds value is set.
Threshold
The rate type of the All Thresholds value.
IOPS: I/O rate, KB/s: Transfer rate
This value is output only when the All Thresholds value is set.
Mode
Set Ctrl Kind operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[PFC],Set Ctrl Kind,Kind=WWN,,Normal end,Seq.=xxxxx
[PFC]
Performance Control function
Set Ctrl Kind
Set Ctrl Kind operation
Kind=WWN
Performance Control function220