HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

Performance Control function
Clear PPC Info
Clear Prioritized Port Control (PPC) Information operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Default Set operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[PFC],Default Set,Kind=WWN,,Normal end,Seq.=xxxxx
[PFC]
Performance Control function
Default Set
Default Set operation
Kind=WWN
WWN is selected as the default. The operation uses the following parameters, as shown in the
following table.
Table 198 Parameters for Default Set operation
DescriptionParamter
The setting content of the Port tab is initialized.Port
The setting content of the WWN tab is initialized.WWN
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
PPCGrp Del/Chg operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,00:00,[PFC],PPCGrp Del/Chg,,Normal end,Seq.=xxxxx
+{Mode, Group,Change Name}=[{Update,XXXXXXXXXXXXXXXX,XXXXXXXXXXXXXXXX}],Num of Groups=1
[PFC]
Performance Control function
PPCGrp Del/Chg
Prioritized Port Control Group (PPCGrp) Delete/Change operation
Normal end
The operation has ended normally.
Performance Control function218