HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

29 Performance Control function
Change PPCGrp operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[PFC],Change PPCGrp,,Normal end,Seq.=xxxxx
+{PPC Group,Priority,UpperLimit,Mode}=[{XXXXXXXXXXXXXXXX,Non-Prio,XXXXXXXX,IOPS}],
Num. of PPC Groups=1
[PFC]
Performance Control function
Change PPCGrp
Change Prioritized Port Control Group (PPCGrp) operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 197 Detailed information for Change PPCGrp operation
DescriptionItem
The SPM group name.PPC Group
The attribute of the host bus adapter in the SPM group after change.
Prio: Prioritized WWN, Non-Prio: Non-prioritized WWN
Priority
The upper limit value when the attribute is set to Non-Prio.
When the attribute is set to Prio, this value is not output.
Upper Limit
The type of rate used for upper limit control.
IOPS: I/O rate, KB/s: Transfer rate
When the attribute is set to Prio, this value is not output.
Mode
The number of the SPM groups that the setting is changed.Num. of PPC Groups
Clear PPC Info operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[PFC],Clear PPC Info,,Normal end,Seq.=xxxxx
[PFC]
XP Audit Log reference guide 217