HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)
28 SNMP function
Set SNMP Agent operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[SNMP],Set SNMP Agent,,Normal end,Seq.=xxxxx
+Install=Disable
+Manager=[(158.214.133.001),(158.214.133.002),(158.214.133.003),(158.214.133.004),
(158.214.133.005),(158.214.133.006),(158.214.133.007),(158.214.133.008),(158.214.133.009),
-(158.214.133.010),(158.214.133.011),(158.214.133.012),(158.214.133.013),(158.214.133.014),
(158.214.133.015),(158.214.133.016),(158.214.133.017),(158.214.133.018),(158.214.133.019),
(snip)
-(158.214.133.031),(158.214.133.032)],Num. of Managers=xx
+Community=12345678911234567892123456789312345678941234567895123456789612345678971234567898
1234567899123456789012345678911234567892123456789312345678941234567895
++Trap=[(158.214.133.001),(158.214.133.002),(158.214.133.003),(158.214.133.004),
(158.214.133.005),(158.214.133.006),(158.214.133.007),(158.214.133.008),(158.214.133.009),
-(158.214.133.010),(158.214.133.011),(158.214.133.012),(158.214.133.013),(158.214.133.014),
(158.214.133.015),(158.214.133.016),(158.214.133.017),(158.214.133.018),(158.214.133.019),
(snip)
-(158.214.133.031),(158.214.133.032)],Num. of Traps=xx
(snip)
-Num. of Communities=xx
+System Group(Name,Contact,Location)=
{123456789112345678921234567893123456789412345678951234567896123456789712345678981234567899
12345678901234567891123456789212345678,
-12345678911234567892123456789312345678941234567895123456789612345678971234567898123456789
9123456789012345678911234567892123456789312345678941234567895123456789612345,
-12345678911234567892123456789312345678941234567895123456789612345678971234567898123456789
9123456789012345678911234567892123456789312345678941234567895123456789612345}
[SNMP]
Simple Network Management Protocol function
Set SNMP Agent
Set SNMP Agent operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 196 Detailed information for Set SNMP Agent operation
DescriptionItem
The setting status of SNMP Agent.
Enable, Disable
Install
The IP address of the registered SNMP manager.Manager
XP Audit Log reference guide 215