HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

ShadowImage z/OS function (for the IBM z/OS)
Set SCP Time
Set State Change Pending (SCP) Time operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 193 Detailed information for Set SCP Time operation
DescriptionItem
The CU number.CU
The State Change Pending (SCP) delay time in seconds.SCP Delay Time(s)
The number of CUs on which the SCP delay time is set.Num. of CUs
Split Pair operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[SI z/OS(R)],Split Pair,,Normal end,Seq.=xxxxx
+Copy pace=Faster,Split Type=QuickSplit
++{S-VOL(CU:LDEV),T-VOL(CU:LDEV),Result}=[{0xAA:0xBB,0xCC:0xDD,0,Normal end},
{0xAA:0xBB,0xCC:0xDD,1,Error(xxxx-yyyy)}],Num. of Pairs = 2
[SI z/OS]
ShadowImage z/OS function (for the IBM z/OS)
Split Pair
Split Pair operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 194 Detailed information for Split Pair operation
DescriptionItem
The set copy speed.
Faster: High speed, Medium: Medium speed, Slower: Low speed
Copy Pace
XP Audit Log reference guide 213