HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

Resync Pair operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[SI z/OS(R)],Resync Pair,,Normal end,Seq.=xxxxx
+Copy pace=Faster,Resync Type=Normal Copy
++{S-VOL(CU:LDEV),T-VOL(CU:LDEV),Result}=[{0xAA:0xBB,0xCC:0xDD,Normal end},
{0xAA:0xBB,0xCC:0xDD,Error(xxxx-yyyy)}],Num. of Pairs=2
[SI z/OS]
ShadowImage z/OS function (for the IBM z/OS)
Resync Pair
Resync Pair operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 192 Detailed information for Resync Pair operation
DescriptionItem
The set copy speed.
Faster: High speed, Medium: Medium speed, Slower: Low speed
Copy Pace
The type of resynchronization.
Normal Copy: Normal resynchronization, Quick Resync: High speed
resynchronization, Reserve Copy: Reverse resynchronization, Quick Restore:
High speed restore
Resync Type
The CU number and the LDEV number of the source volume in the resynchronized
pair.
S-VOL(CU:LDEV)
The CU number and the LDEV number of the target volume in the resynchronized
pair.
T-VOL(CU:LDEV)
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of resynchronized pairs.Num. of Pairs
Set SCP Time operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,00:00,[SI z/OS(R)],Set SCP Time,,Normal end,Seq.=xxxxx
+{CU, SCP Delay Time(s)}=[{0x00,600},{0x01,600},{0x02,600},{0x03,600},{0x04,600},(snip), {0x3F,600}],
Num. of CUs=64
[SI z/OS]
ShadowImage (SI) z/OS function212