HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

Change Reserve operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,00:00,[SI z/OS(R)],Change Reserve,,Normal end,
Seq.=xxxxx
+Attribute=Set
++{VOL(CU:LDEV),Result}=[{0xXX:0xYY,Normal end},{0xXX:0xYY, Error(xxxx-yyyy)}],
Num.of Vols=2
[SI z/OS]
ShadowImage z/OS function (for the IBM z/OS)
Change Reserve
Change Reserve operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 188 Detailed information for Change Reserve operation
DescriptionItem
Indicates whether the reserve attribute is set or cancelled.
Set: the reserve attribute is set, Reset: the reserve attribute is cancelled.
Attribute
The CU number and the LDEV number of the volume that the reserve attribute is
set or cancelled.
VOL(CU:LDEV)
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of volumes that the reserve attribute is set or cancelled.Num. of Vols
CTG operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[SI z/OS(R)],CTG,,Normal end,Seq.=xxxxx
+{CTG,Command,Result}=[{0x00,,Normal end},{0x01,,Error(xxxx,yyyy)}],Num. of CTGs=2
[SI z/OS]
ShadowImage z/OS function (for the IBM z/OS)
CTG
Consistency Group (CTG) operation
Normal end
The operation has ended normally.
ShadowImage (SI) z/OS function208