HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

27 ShadowImage (SI) z/OS function
Add Pair operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[SI z/OS(R)],Add Pair,,Normal end,Seq.=xxxxx
+Copy Pace=Faster
++{S-VOL(CU:LDEV),T-VOL(CU:LDEV),Result}=[{0xAA:0xBB,0xCC:0xDD,0,Normal end},
{0xAA:0xBB,0xCC:0xDD,1,Error(xxxx-yyyy)}],Num. of Pairs=2
[SI z/OS]
ShadowImage z/OS function (for the IBM z/OS)
Add Pair
Add Pair operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 187 Detailed information for Add Pair operation
DescriptionItem
The set copy speed.
Faster: High speed, Medium: Medium speed, Slower: Low speed
Copy Pace
The CU number and the LDEV number of the source volume in the created
pair.
S-VOL(CU:LDEV)
The CU number and the LDEV number of the target volume in the created
pair.
T-VOL(CU:LDEV)
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of created pairs.Num. of Pairs
XP Audit Log reference guide 207