HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 173 Detailed information for Delete Path operation
DescriptionItem
The serial number of the device of RCU where the path has been deleted.S/N
The path group ID of the path deleted. When the path group is a default
setting, Default is output.
Path Gr. ID
The controller ID of the RCU where the path has been deleted.Controller ID
Indicates SSID.SSID
The port number of MCU.MCU Port
The port number of RCU.RCU Port
The number of path pairs deleted.Num. of Port Pairs
Delete RCU operation
Example 1 (CU Free is used)
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[RCU],Delete RCU,,Normal end,Seq.=xxxxx
+{S/N,,}={99999,Default,4}
Example 2 (CU Free is not used)
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[RCU],Delete RCU,,Normal end,Seq.=xxxxx
+{S/N,SSID}={99999,0x0004}
[RCU]
Remote Control Unit function
Delete RCU
Delete Remote Control Unit (RCU) operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
XP Audit Log reference guide 191