HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

DescriptionItem
The number of port pairs set.Num. of Port Pairs
Add RCU operation
Example 1 (CU Free is used)
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[RCU],Add RCU,,Normal end,Seq.=xxxxx
+{S/N,Path Gr. ID,Controller ID,Min. Path,MIH Time(s),Round Trip Time(ms),Incident,FREEZE}=
{99999,Default,4,08,015,001,only to RCU host,Disable}
++{MCU Port,RCU Port}=[{1E,3E},{5E,7E},{1F,3F},{5F,7F},{1G,3G},{5G,7G},{1H,3H},{5H,7H}],
Num. of Port Pairs=8
Example 2 (CU Free is not used)
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[RCU],Add RCU,,Normal end,Seq.=xxxxx
+{S/N,MCU,RCU,SSID,Controller ID,Min. Path,MIH Time(s),Round Trip Time(ms),Incident,
FREEZE}={99999,0x00,0x3f,0x0004,4,08, 015,001,only to RCU host,Disable}
++{MCU Port,RCU Port}=[{1E,3E},{5E,7E},{1F,3F},{5F,7F},{1G,3G},{5G,7G},{1H,3H},{5H,7H}],
Num. of Port Pairs=8
[RCU]
Remote Control Unit function
Add RCU
Add Remote Control Unit (RCU) operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 171 Detailed information for Add RCU operation
DescriptionItem
Indicates a serial number of the registered RCU device.S/N
The path group ID of the registered RCU. When the path group ID is default
setting, Default is output.
Path Gr. ID
The controller ID of the registered RCU device.Controller ID
The CU number of the connected CU.MCU
The CU number of the paired CU.RCU
The SSID of the registered RCU.SSID
The port number of MCU.MCU Port
The port number of the registered RCU.RCU Port
Remote Control Unit (RCU) function188