HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

20 Performance Control Base Monitor
function
Monitoring S/W operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,00:00,[PCBM],Monitoring S/W,Enable 60sec,,Normal end,
Seq.=xxxxx
[PCBM]
Performance Control Base Monitor function
Monitoring S/W
Monitoring Switch (S/W) operation
Enable 60sec
Enable 60 sec is selected as the parameter. The operation uses the following parameters, as shown
in the following table.
Table 164 Parameters for Monitoring S/W operation
DescriptionParameters
Monitoring is enabled and the gathering interval is set as XX sec.Enable XXsec
Monitoring is disabled.Disable
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999).
XP Audit Log reference guide 179