HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

Set Fibre Address operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[LUNM],Set Fibre Address,,Normal end,Seq.=xxxxx
+{Port,Fibre Addr.}=[{XX,1},{XX,126}],Num.of Ports=2
[LUNM]
LUN Manager function
Set Fibre Address
Set Fibre Address operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 138 Detailed information for Set Fibre Address operation
DescriptionItem
The name of the port that the address has been changed.Port
The address of Fibre Channel port after change using the number from 1 to 126.
See Table 139 for relation of number and Fibre Channel port address.
Fibre Addr
The number of ports where address has been changed.Num. of Ports
Table 139 Output values to detailed information and addresses of Fibre Channel port
Address*ValueAddress*ValueAddress*ValueAddress*Value
3A(96)9772 (64)65B2 (32)33EF (0)1
39(97)9871 (65)66B1 (33)34E8 (1)2
36(98)9971 (65)67AE (34)35E4 (2)3
35(99)1006D (67)68AD (35)36E2 (3)4
34(100)1016D (67)69AC (36)37E1 (4)5
33(101)1026B (69)70AB (37)38E0 (5)6
32(102)1036A (70)71AA (38)39DC (6)7
31(103)10469 (71)72A9 (39)40DA (7)8
2E(104)10567 (72)73A7 (40)41D9 (8)9
2D(105)10666 (73)74A6 (41)42D6 (9)10
2C(106)10765 (74)75A5 (42)43D5 (10)11
LUN Manager (LUNM) function158