HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

Set FCSP Port Info
Set Fibre-Channel Security Protocol (FCSP) Port Information operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 135 Detailed information for Set FCSP Port Info operation
DescriptionItem
The name of the port where authentication parameter has been set.Port
The time to execute authentication after the failure of port authentication. The
unit is second.
Auth_TOV
The period of time to reject authentication when port authentication have failed.
The unit is minute.
Reject Time
The number of authentication failures allowed before port authentication is rejec-
ted.
Reject Count
The number of ports where authentication parameter has been set.Num. of Ports
Set FCSP Port Switch operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,00:00,[LUNM],Set FCSP Port Switch,,Normal end, Seq=xxxxx
+{Port,Switch,DH Group,Auth,UserName}=[{1E,Enable,0,Interactive,1111111111111111},
{3E,Disable,0,One Direction,2222222222222222}],Num. of Ports=2
[LUNM]
LUN Manager function
Set FCSP Port Switch
Set Fibre-Channel Security Protocol (FCSP) Port Switch operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 136 Detailed information for Set FCSP Port Switch operation
DescriptionItem
The name of the port where authentication parameter has been set.Port
LUN Manager (LUNM) function156