HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

DescriptionItem
The number of logical volumes where the command device setting is changed.Num. of LDEVs
Set FCSP Host operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[LUNM],Set FCSP Host,,Normal end,Seq.=xxxxx
+{Port,HostGrpID,Kind,UserName,Change UserName}=[{1E,0x01,Add,1111111111111111,-},
{3E,0x01,Change,2222222222222222,3333333333333333},{5E,0x01,Delete,4444444444444444,-}],
Num. of Info=3
[LUNM]
LUN Manager function
Set FCSP Host
Set Fibre-Channel Security Protocol (FCSP) Host operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 134 Detailed information for Set FCSP Host operation
DescriptionItem
The name of the port which includes the host group where user name has been
set.
Port
The number of the host group where user name has been set.HostGrpID
The setting status of the user name which is registered to the host group.
Add: Add user name, Change: Change user name, Delete: Delete user name.
Kind
The user name added or deleted when Kind is Add or Delete. The user name before
change when Kind is Change.
UserName
The user name after change when Kind is Change. Indicates a dash (-) when Kind
is Add or Delete.
Change UserName
The number of added, changed or deleted user names.Num. of Info
Set FCSP Port Info operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,00:00,[LUNM],Set FCSP Port Info,,Normal end, Seq=xxxxx
+{Port,Auth_TOV,Reject Time,Reject Count}=[{1E,45,3,3},{3E,60,1,10}],Num. of Ports=2
[LUNM]
LUN Manager function
XP Audit Log reference guide 155