HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

Detailed information for this operation is shown in the following table.
Table 130 Detailed information for Set Authentication operation
DescriptionItem
The name of the port where the host deleted from host group was connected.Port
The host group number where the host is deleted.HostGrpID
The setting status of user authentication.
Enable: user authentication enabled, Disable: user authentication disabled
Authentication
The number of user authentication set.Num. of Authentication
Set Channel Speed operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[LUNM],Set Channel Speed,,Normal end,Seq.=xxxxx
+{Port,Speed(Gbps)}=[{XX,1},{XX,2},{XX,Auto},{XX,10}],Num. of Ports=4
[LUNM]
LUN Manager function
Set Channel Speed
Set Channel Speed operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 131 Detailed information for Set Channel Speed operation
DescriptionItem
The name of the port that the host speed (data transfer speed) is set.Port
The host speed set. The unit is Gbps (Gigabits per second). When Auto is set
for the host speed, Auto is output.
Speed(Gbps)
The number of ports where the host speed is set.Num. of Ports
Set CommandDev operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[LUNM],Set CommandDev,,Normal end,Seq.=xxxxx
+{CU:LDEV,CommandDev}=[{0xXX:0xXX,Disable},{0xXX:0xXX,Enable}],Num.of LDEVs=2
[LUNM]
LUN Manager function
XP Audit Log reference guide 153