HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

LUN Manager function
Change WWN
Change World Wide Name (WWN) operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 123 Detailed information for Change WWN operation
DescriptionItem
The name of the port where the host is connected.Port
The host group number on which the host with WWN or nickname of the host
bus adapter being changed is registered.
HostGrpID
Indicates WWN of the host bus adapter before change. WWN is represented
in hexadecimal.
WWN
Indicates WWN of the host bus adapter after change.Change iSCSI Name
The nickname of the host bus adapter after change.Alias
The number of host bus adapters (WWN) where the settings have been
changed.
Num. of iSCSI Target
Delete DKC WWN operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[LUNM],Delete DKC WWN,,Normal end,Seq.=xxxxx
+{Port,Delete WWN}=[{XX,0xXXXXXXXXXXXXXXXX},{XX,0xXXXXXXXXXXXXXXXX}],Num. of =2
[LUNM]
LUN Manager function
Delete DKC WWN
Delete Disk Controller (DKC) World Wide Name (WWN) operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
LUN Manager (LUNM) function148