HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

DescriptionItem
The iSCSI name before change.iSCSI name
The iSCSI name after change.Change iSCSI name
The iSCSI nickname after change.Name
The number of iSCSI name changed.Num. of iSCSI name
Change iSCSI Target operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,00:00,[LUNM],Change iSCSI Target,,Normal end,Seq.=xxxxx
+{Port,HostGrpID,Target name,Alias}=[{1E,0x05,iqn.xxxxxxxxxxxxxxxxxxxx,aaaaaaaaaa},
{3E,0x05,iqn.yyyyyyyyyyyyyyyyyyyy,bbbbbbbbbb}],Num. of iSCSI Target=2
[LUNM]
LUN Manager function
Change iSCSI Target
Change iSCSI Target operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 122 Detailed information for Change iSCSI Target operation
DescriptionItem
The name of the port where the iSCSI Target has been changed.Port
The host group number where the iSCSI Target has been changed.HostGrpID
The iSCSI Target before change.iSCSI Name
The iSCSI Target after change.Change iSCSI Name
The alias of the iSCSI Target name changed.Alias
The number of iSCSI Target changed.Num. of iSCSI Target
Change WWN operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[LUNM],Change WWN,,Normal end,Seq.=xxxxx
+{Port,HostGrpID,WWN,Change WWN,Change Nickname}=[{XX,0xXXX,0xXXXXXXXXXXXXXXXX,
0xXXXXXXXXXXXXXXXX,XXXXXXXXXXXXXXXX}],Num.of WWNs=1
[LUNM]
XP Audit Log reference guide 147