HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

DescriptionItem
The user name where user authentication information has been set. The user name
before change is indicated when Kind is set to Change.
UserName
The user name after change is indicated when Kind is set to Change. A hyphen (-
) is indicated when Kind is set to Add or delete.
Change UserName
The authentication type which is CHAP (Challenge Handshake Authentication
Protocol).
Protocol
The number of user authentication information set.Num. of Info
Auth Info (Target) operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[LUNM],Auth Info(Target),,Normal end,Seq.=xxxxx
+{Port,HostGrpID,UserName}=[{1E,0x01,user1},{3E,0x01,user2}],Num. of Info=2
[LUNM]
LUN Manager function
Add Info (Target)
Add Info (Target) operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 119 Detailed information for Auth Info (Target) operation
DescriptionItem
The name of the port where user authentication information for Target has been
set.
Port
The host group number where user authentication information for Target has
been set.
HostGrpID
The user name where user authentication information for Target has been set.UserName
The number of user authentication information for Target set.Num. of Info
Change Host Group operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,00:00,[LUNM],Change Host Group,,Normal end,Seq.=xxxxx
+{Port,HostGrpID,HostGrpName}=[{XX,XXX,XXXXXXXXXXXXXXXX},{XX,XXX,XXXXXXXXXXXXXXXX}],
Num. of Host Groups=2
[LUNM]
XP Audit Log reference guide 145