HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

DescriptionItem
The number of iSCSI Target added.Num. of iSCSI Target
Add LU Path operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[LUNM],Add LU Path,,Normal end,Seq.=xxxxx
+{Port,HostGrpID,LUN,CU:LDEV}=[{XX,0xXXX,XX,0xXX:0xXX},{XX,0xXXX,XX,0xXX:0xXX},
{XX,0xXXX,XX,0xXX:0xXX}],Num. of Paths=3
[LUNM]
LUN Manager function
Add LU Path
Add Logical Unit (LU) Path operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 116 Detailed information for Add LU Path operation
DescriptionItem
The name of the port where the host group has been added.Port
The host group number newly added.HostGrpID
Indicates LUN of the logical volume linked to the host group.LUN
The CU and LDEV numbers of the logical volume linked to the host group.CU:LDEV
The number of LU paths set.Num. of Paths
Add WWN operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[LUNM],Add WWN,,Normal end,Seq.=xxxxx
+{Port,HostGrpID,WWN,Nickname }=[{XX,0xXXX,0xXXXXXXXXXXXXXXXX,XXXXXXXXXXXXXXXX},
{XX,0xXXX,0xXXXXXXXXXXXXXXXX,XXXXXXXXXXXXXXXX}],Num. of WWNs=2
[LUNM]
LUN Manager function
Add WWN
Add World Wide Name (WWN) operation
Normal end
The operation has ended normally.
XP Audit Log reference guide 143