HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

DescriptionItem
The type of AC-BOX.Power Supply Type
The DKU mounting location.Disk Unit (DKU)
The type of AC-BOX.AC-BOX
The number of AC-BOX.Num. of AC-BOXs
The type of PDU.PDU
The number of PDUs.Num. of PDUs
The CU and LDEV numbers.CU: LDEV
Indicates the setting status of Destage.
ON: Execute write through operation (report the completion of the writing
to the host after the writing to the disk drive has completed).
OFF: Do not execute write through operation (report the completion of the
writing to the host when the data is written in the cache memory).
Destage
The number of LDEVs.Num. of LDEVs
The LPR name.LPR
The level of Cache Tuning.Cache Tuning
The number of LPRs.Num. of LPRs
Command ControlCommand Control
The local mode number.Mode
The setting status.
ON: Set, Off: Release
Set
The number of local modes.Num. of Modes
Setting executed from the debug pane (Set: fix).Debug Mode
NOTE:
Only the changed items will be output.
System Tuning operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],System Tuning,,Normal end,Seq.=xxxxx
+Serial No.=63507
+IP Address Mode=Based on Serial Number
+IP Address=126.248.19
+Subnet Mask=255.0.0
+WDCP=ON
+DDUMP=ON
+Power Supply Type=3-phase
+{DKU,AC-BOX}=[{DKU-R1,3-Phase},{DKU-R2,3-Phase}],Num of AC-BOXs=2
+{DKU,PDU}=[{DKU-R1,HITACHI Original},{DKU-R2,HITACHI Original}],Num of PDUs=2
XP Audit Log reference guide 127