HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

+{LPR,Mode,Set}=[{System,154,ON},{LPR00,165,OFF}],Num of Modes=2
+Debug Mode=Set
[Install]
Install function
System Option
System Option operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (000000 to 999999)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 95 Detailed information for System Option operation
DescriptionItem
Indicates the setting status of Spare Disk Recover.
Interleave: Give priority to the access from the host while executing copy
process, Full speed: Give priority to the copy process.
Spare Disk Recover
Indicates the setting status of Disk Copy Pace.
Low: Low speed, Medium: medium speed, Faster: High speed
Disk Copy Pace
Indicates the setting status of Copy Operation (Correction Copy).
ON: Execute Correction Copy, OFF: Do not execute Correction Copy
Copy Operation (Correction
Copy)
Indicates the setting status of Copy Operation (Dynamic Sparing).
ON: Execute Dynamic Sparing, OFF: Do not execute Dynamic Sparing
Copy Operation (Dynamic Spar-
ing)
The method to allocate the serial number reported by Read Configuration
Data command.
ON: Method supporting 4096, OFF: Traditional compatible method
Read Configuration Data Mode
The operation when power supply is lost.
Memory Backup Mode: Set to Memory Backup Mode
Destage Mode: Set to Destage Mode
Power Lost Mode
Indicates the setting status of External USP.
ON: External USP is enabled, OFF: External USP is disabled
External USP
The setting of valid time (minute) of the external USP.min
The cache segment sizeCache Segment Size
The size of the cache on Side A.SideA
The size of the cache on Side B.SideB
The threshold to report link failure.Link Failure Threshold
Install function126