HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

Seq.=xxxxxx
Sequence number of log information (000000 to 999999)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 92 Detailed information for Set Speed Mode operation
DescriptionItem
The Channel Adapter (CHA) name (name of channel adapter).Channel Adapter (CHA)
The port block. Port blocks A, B, C, and D are output in case of a 16-port
channel adapter. In case of an 8-port channel adapter, port blocks A and
B are output.
Port Block
The mode set to the port.
Standard: Standard mode. High Speed/MIX: High speed mode/Mix mode.
Mode
The number of port blocks in the channel adapter.Num. of Blocks
The number of channel adapters that the mode is changed.
Num. of Channel Adapter
(CHA)s
Set Subsystem Time operation
Example 1 (TOD Change)
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Set Subsystem Time,TOD Change,
Normal end,Seq.=xxxxx
+Time=YYYY/MM/DD HH:mm:SS
Example 2 (Synchro. Infor.)
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Set Subsystem Time,Synchro. Infor.,
Normal end,Seq.=xxxxx
+{Use Synchro.,SNTP IP,SNTP Port,Time Zone,Check Time}={Valid,(123.456.789.123),100,
Tokyo Standard Time,23}
Example 3 (NAS Time Zone)
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Set Subsystem Time,NAS Time Zone,
Normal end,Seq.=xxxxx
+Time Zone=Tokyo Standard Time
[Install]
Install function
Set Subsystem Time
Set Subsystem Time operation
TOD Change, Synchro. Infor., and NAS Time Zone
Install function124