HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

Set IP Address operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Set IP Address,SVP&DKC,Normal end,
Seq.=xxxxx
+{IPAdd,Subnet,Use Duplex,SVP Kind,M-SVP IPAdd,M-SVP Sunbet,S-SVP IPAdd,S-SVP Subnet}=
{(123.456.789.123),(255.255.255.255),Valid,Master SVP,(111.222.333.444),(255.255.255.255),
(555.666.777.888),(255.255.255.255)}
[Install]
Install function
Set IP Address
Set IP Address operation
SVP&DKC
SVP&DKC is the selected parameter. This operation uses the following parameters, as shown in the
following table.
Table 89 Parameters for Set IP Address operation
DescriptionParameter
Change of the IP address for SVPSVP
Change of the IP address for SVP and DKCSVP&DKC
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (000000 to 999999)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 90 Detailed information for Set IP Address operation
DescriptionItem
The IP address in SVP.IP Add
The subnet mask in SVP.Subnet
Indicates whether the Duplex setting in SVP is valid or invalid.
Valid: Valid, Invalid: Invalid
Use Duplex
The kind of duplicated SVP.
Master SVP: Master SVP, Standby SVP: Standby SVP.
SVP Kind
The IP address of Master SVP.M-SVP IP Add
The subnet mask of Master SVP.M-SVP Subnet
The IP address of Standby SVP.S-SVP IP Add
Install function122