HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

Detailed information displays for this operation, as shown in the following table.
Table 87 Detailed information for Set Fibre Topology operation
DescriptionItem
The name of the port where the topology of Fibre Channel is set.Port
Indicates whether the Fabric switch is enabled or disabled.
Enable: Enabled, Disable: Disabled
Fabric
The connecting mode of the Fabric switch selected.
FC-AL: FC-AL is selected, P-to-P: P-to-P is selected
Connection
The number of ports where the topology of Fibre Channel is set.Num. of Ports
Set Host Mode operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Set Host Mode,,Normal end,Seq.=xxxxx
+{Port,HostGrpID,Mode,Option}=[{XX,0xXXX,0x00,0xXXXXXXXX},{XX,0xXXX,0x4F,0xXXXXXXXX}],
Num. of Host Groups=2
[Install]
Install function
Set Host Mode
Set Host Mode operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (000000 to 999999)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 88 Detailed information for Set Host Mode operation
DescriptionItem
The name of the port where the host group is created.Port
The host group number.HostGrpID
The host mode set. See the HP StorageWorks LUN Manager User's Guide for
the meaning of the host mode number.
Mode
The host mode option set. Hexadecimal values are output. See Table 4.133 for
the relation of output values and host mode option.
Option
The number of host groups that the host mode setting is changed.Num. of Host Groups
XP Audit Log reference guide 121