HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

Set Fibre Address operation

user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Set Fibre Address,,Normal end,

Seq.=xxxxx

+{Port,Fibre Addr.}=[{XX,1},{XX,126}],Num. of Ports=2

[Install]

Install function

Set Fibre Address

Set Fibre Address operation

Normal end

The operation has ended normally.

Seq.=xxxxxx

Sequence number of log information (000000 to 999999)

Detailed Information

Detailed information displays for this operation, as shown in the following table.

Table 86 Detailed information for Set Fibre Address operation

DescriptionItem

The name of the port that the fibre address has been set.Port

The address of Fibre Channel port after change using the number from 1 to 126.

See Table 4.130 for relation of number and Fibre Channel port address.

Fibre Addr.

The number of ports where address has been set.Num. of Ports

Set Fibre Topology operation

user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Set Fibre Topology,,Normal end,

Seq.=xxxxx

+{Port,Fabric,Connection}=[{XX,Enable,FC-AL},{XX,Disable,FC-AL},{XX,Enable,P-to-P},

{XX,Disable,P-to-P}],Num. of Ports=4