HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

DescriptionItem
The ending cylinder number (CC) and the ending head number (HH) which the
Cache Residency is set or canceled.
End CC-HH
The number of Cache Residency which has been set or canceled.Num of DCR Settings
New Installation operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,GMT,[Install],New Installation,,Normal end,Seq.=xxxxx
+Micro Program={Minimum Config,DKCMAIN,RAMBOOT,LCP,HTP,LCDG,FCDG,PCDG,NASBIOS},
Num. of Kind=9
[Install]
Install function
New Installation
New Installation operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (000000 to 999999)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 77 Detailed information for New Installation operation
DescriptionItem
The kind of microprogram installed (Minimum Config, DKCMAIN, RAMBOOT,
LCP, HTP, LCDG, FCDG, PCDG, or NASBIOS).
Micro Program
The number of the kind of the installed microprogram.Num. of Kind
Open DCR operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Open DCR,,Normal end,Seq.=xxxxx
+CU:LDEV=0x00:0x00
++{Define,Mode,Prestaging,Start LBA,End LBA}=[{Set,Bind,No,0,2015},
{Set,Priority,Yes,3636,4175},{Delete,-,-,3636,4175}],Num. of DCR Setting=3
[Install]
Install function
Open DCR
Open DCR operation
Normal end
The operation has ended normally.
XP Audit Log reference guide 113