HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

Detailed information displays for this operation, as shown in the following table.
Table 75 Detailed information for MP Install operation
DescriptionItem
The kind of microprogram installed (Minimum Config, DKCMAIN, RAM-
BOOT, LCP, HTP, LCDG, FCDG, PCDG, or NASBIOS).
Micro Program
The number of the kind of the installed microprogram.Num. of Kind
The mounting location of the installed microprogram.Target MP
The number of microprogram installed.Num. of MP
M/F DCR operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],M/F DCR,,Normal end,Seq.=xxxxx
+CU:LDEV=0x00:0x00
++{Define,Mode,Prestaging,Start CC-HH,End CC-HH}=[{Set,Bind,No,00-00,00-10},
{Set,Priority,Yes,1000-00,1009-14}],{Delete,-,-,1000-00,1009-14}],Num. of DCR Settings=3
[Install]
Install function
M/F DCR
M/F DCR operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (000000 to 999999)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 76 Detailed information for M/F DCR operation
DescriptionItem
The CU number and the LDEV number of the logical volume (for a mainframe system)
where Cache Residency is set.
CU:LDEV
The setting status of Cache Residency. Set: set, Delete: cancelDefine
The setting mode of Cache Residency. Indicates a dash (-) when Define is Delete.
Bind: Bind mode, Priority: Priority mode
Mode
Indicates whether the Prestaging mode set is enabled or disabled. Indicates a dash
(-) when Define is Delete.
No: Prestaging mode is disabled, Yes: Prestaging mode is enabled
Prestaging
The starting cylinder number (CC) and the starting head number (HH) which the
Cache Residency is set or canceled.
Start CC-HH
Install function112