HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (000000 to 999999)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 74 Detailed information for Micro Program operation
DescriptionItem
The media which the microprogram to be exchanged is stored (Floppy disk, CD-
ROM, SVP HDD, HDD Backup or remote transfer).
Micro Media
The method to exchange the microprogram. Online: Exchanging the microprogram
online,
Offline: Exchanging the microprogram offline.
Exchange How
The port exchange mode of an open system (Stop SCSI, Non-Stop SCSI, Skip
SCSI Normal, Skip SCSI Force, Alternate Manual, or Alternate Auto). However,
it is not output when the PCB of the open system is not installed, or MP reboot is
not executed.
Open Port Mode
The reboot group (By1/2, By1/4, or By One). However, it is not output when
microprogram is changed offline, or MP reboot is not executed.
Reboot Grp.
The kind of microprogram.Micro Kind
The old version number of the microprogram.Old Ver
The new version number of the microprogram.New Ver
The number of the kind of microprogram.Num.of Kind
MP Install operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,GMT,[Install],MP Install,,Normal end,Seq.=xxxxx
+Micro Program={Minimum Config,DKCMAIN,RAMBOOT,LCP,HTP,LCDG,FCDG,PCDG,NASBIOS},
Num. of Kind=9
+Target MP={CHP00-1E,CHP01-1E,DKP80-1A},Num. of MP=3
[Install]
Install function
MP Install
MP Install operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (000000 to 999999)
Detailed Information
XP Audit Log reference guide 111