HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

+Num. of PGs=3
++{B4,SPARE,Dreve Type}={1,1,DKR2F-J300FC},Num. of SPAREs=1
[Install]
Install function
Install
Install operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (000000 to 999999)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 63 Detailed information for Install operation (installing additional storage systems, ECC groups,
or LDEVs)
DescriptionItem
The Disk Adapter (DKA) mounting location.Disk Adapter (DKA)
The number of Disk Adapter (DKA)s.Num. of Disk Adapter (DKA)s
The mounting location of DKU.Disk Unit (DKU)
The type of AC-BOX.AC-BOX
The number of DKUs.Num. of Disk Unit (DKU)s
The type of PDU.PDU
The fibre switch mounting location.FSW
The number of fibre switches.Num. of FSWs
The parity group number.PG
The RAID Level.RAID Level
The type of the drive.Drive Type
The emulation type.Emulation
The RAID concatenated parity group number. A hyphen (-) is indic-
ated when the parity group is not RAID concatenated.
Concatenation
The CU number and the LDEV number.CU:LDEV
The capacity of CV.Size
The unit of the capacity of CV.Unit
The storage system ID.SSID
The number of LDEVs.Num. of LDEVs
XP Audit Log reference guide 103