HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

Format Stop operation
NOTE:
This log information is output when the format process is suspended.
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Format Stop,,Normal end,Seq.=xxxxx
+PG=[1-1],Num. of PGs=1
+PG=[E1-1],Num. of PGs=1 –> in case of an external volume
+PG=[V1-1],Num. of PGs=1 –> in case of a virtual volume
+LDEV=[0x00-0x01],Num. of LDEVs=1
[Install]
Install function
Format Stop
Format Stop operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (000000 to 999999)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 61 Detailed information for Format Stop operation
DescriptionItem
The parity group number.PG
The number of parity groups.Num. of PGs
The LDEV number.LDEV
The number of LDEVs.Num. of LDEVs
Init DKC iSCSI Name operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install], Init DKC iSCSI name,,Normal end,
Seq.=xxxxx
[Install]
Install function
Init DKC iSCSI name
Init Disk Controller (DKC) iSCSI name operation
Normal end
The operation has ended normally.
Install function100