HP StorageWorks XP Audit Log reference guide for the XP12000/XP10000 and SVS 200 (5697-7157, November 2007)

Figure 8 Syslog audit log file
The syslog files include the following items, listed in the following table.
Table 6 Items in the syslog file
ExplanationItemNo.
The priority according to the following formula, enclosed by bracket (< >):Priority1
Priority = 8 × Facility + Severity
Facility is 1 (fixed).
The Severity depending on the type of log information:
3: Error (indicating that the operation has ended abnormally)
4: Warning (indicating that the operation has partly ended abnormally or was
canceled during the operation)
6: Informational (indicating that the operation has ended normally)
For example, <11> is output for priority when severity is error.
The date and time in the format of MMM DD HH:mm:SS (MMM: month, DD:
day, HH: hour, mm: minute and SS: second).
NOTE:
If the DD is a single digit (for example, 1), it will be output as “ 1” (with
a blank space before 1) and not as “01.”
Date, time2
The host name (SVP).Detected location3
The detection entity identification character (Storage).Program name4
The Unified specification identification character (CELFSS).Unified specification
identification
information
5
The revision number of the Unified specification document (1.1).6
The sequence number of the syslog header information.Message
identification
information
7
Message ID. Not displayed because it is not used.8
Audit log file format38