HP StorageWorks XP Audit Log reference guide for the XP12000/XP10000 and SVS 200 (5697-7157, November 2007)

Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 245 Detailed information for Journal-Option operation
DescriptionItem
The journal group number.JNLG
The ratio of the metadata to the journal data.MetaData Ratio
When the ratio is 1:32, the number for MetaData Ratio is 32.
The number of extents.Extent
The overflow watch time of the metadata or journal data. The unit is second.Data Overflow Watch(s)
Indicates whether or not inflow control is executed. Yes: Controlled, No: Not
controlled
Inflow Control
The speed of initial copy. 150: Low speed, 500: Medium speed, 1500: High
speed
Copy Pace
The timer type. System: System timer, Local: Local timer, None: No timerTimer Type
The path blockade watch period set. The unit is minute. The unit is minutes
(min), hours (hour) or days (day). Example: 30(min) indicates 30 minutes.
Path Watch Time(m)
Indicates whether to transfer the path blockade watch period set to the master
journal group to the restore journal group. Yes: Transfer, No: Do Not Transfer.
Forward Path Watch Time
Indicates whether to store the journal data in the restore journal group in
cache.
Use of Cache
Use: Store the journal data in cache. Not Used: Store the journal data in
journal volume.
The transfer speed of the communication line. The unit is megabits per second
(Mbps).
Speed of Line(Mbps)
Indicates the operation mode when Delta resync operation have failed. Entire:
Copy the entire data volume, None: Do not copy the data volume
Delta resync Failure
The result of operation.Result
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
The number of journal groups.Num. of JNL Grps
XP Audit Log reference guide 263