HP StorageWorks XP Audit Log reference guide for the XP12000/XP10000 and SVS 200 (5697-7157, November 2007)

DescriptionItem
Indicates the date of the setting in YYYY/MM/DD format (YYYY: year, MM:
month, DD: day). A hyphen (-) is indicated when the information is not set.
Date
The remaining date of the battery shelf life. A hyphen (-) is indicated when the
information is not set.
Remained Life
Set Channel Speed operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Set Channel Speed,,Normal end,
Seq.=xxxxx
+{Port,Speed(Gbps)}=[{XX,1},{XX,2},{XX,Auto}],Num. of Ports=3
[Install]
Install function
Set Channel
Speed Set Channel Speed operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (000000 to 999999)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 84 Detailed information for Set Channel Speed operation
DescriptionItem
The name of the port that the channel speed is set.Port
The channel speed set.Speed(Gbps)
1: 1 Gbps, 2: 2 Gbps, 4: 4 Gbps, Auto: Auto mode.
The number of ports where the channel speed is set.Num. of Ports
Set CommandDev operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Set CommandDev,,Normal end,Seq.=xxxxx
+{CU:LDEV,CommandDev}=[{0xXX:0xXX,Disable},{0xXX:0xXX,Enable}],Num. of LDEVs=2
[Install]
Install function
Set CommandDev
Set Command Device (CommandDev) operation
Normal end
Install function118