HP StorageWorks Snapshot XP user guide (T1713-96023, October 2006)

3. In the tree, select the port, host group, iSCSI target, or LUN containing the Snapshot XP pairs you

want to delete. A list of pairs or volumes appears in the volume list.

4. Select and right-click the Snapshot XP pairs you want to delete, and select Pairsplit-S. The Pairsplit-S

pane (Figure 17) appears.

NOTE:

You cannot delete a Business Copy XP pair and Snapshot XP pair at one time.

5. Click OK. The Pairsplit-S pane closes, and a list of Snapshot XP pairs you are deleting appears in the

Preset list on the Business Copy XP main pane.

6. Click Apply.Aconﬁrmation m essage appears.

7. Click OK.Theconﬁrmation message closes, and the pair is deleted from the array.

Figure 17 Pairsp lit-S pane

• Volume list: Information about the Snapshot XP pairs you are deleting.

• Port: P-VOL's port ID (cluster and channel number)

• G-ID: Group number of the P-VOL's host group or i SCSI target

• LUN: P-VOL's CU:LDEV (control unit image:logical device ID)

• MU: Snapshot ID

• Status: Status of the Snapshot XP pair

• Port: S-VOL's p ort ID (cluster and channel number)

• G-ID: Group number of the S -VOL's host group or iSCSI target

• LUN(S): S-VOL's CU:LDEV (control unit image:logical device ID)

• Type: Emulation type

• Capacity(MB): Snaps hot XP pair's storage capacity

• CLPR(P): P-VOL's cache logical partition

• CLPR(S): S-VOL's cache logical par tition

• OK button: Closes the Pairsplit-S pane, and displays a list of Snapshot X P p airs in the Preset list.

• Cancel button: Cancels the operation, and closes the Pairsplit-S pane.

HP StorageWorks Snapshot XP user guide