HP StorageWorks Snapshot XP user guide (T1713-96023, October 2006)

NOTE:

• The value you specify as the interval between LDEV numbers counts only available LD EV numbers

and skips those that are not selectable.

• Even when you use multiple CUs, LDEV numbers are assigned according to the setting in the

Interval list.

• CU number of anoth e r SLPR is used.: Used to select the CU numbers of an SLPR other than

the SLPR you are now in.

• Back button: Returns to the Create V-VOL wizard pane (1) while maintaining settings in this pane.

• Next button: Fixes the setting in this pane, and displays the Create V-VOL wizard pane (3).

• Cancel button: Cancels the setting in the Create V -VOL wizard pane (2), a nd closes the pane.

Figure 16 Create V-VOL wizard pane (3)

• V-VOL information setting list (middle of pane): Information about the V-VOLs you are creating.

• VDEV:VDEVnumber

• Emulation:V-VOL'semulationtype

• Capacit y : V-VOL's capacity

• CU:LDEV: V-VOL's CU and LDEV numbers

• Back button: Returns to the Create V-VOL wizard pane (2) while maintaining settings in this pane.

• OK button: Fixes the setting in the Create V-VOL wizard pane (3) , and closes the p ane.

• Cancel button: Cancels the setting in the Create V -VOL wizard pane (3) , and closes the pane.

Snapshot XP operations