HP StorageWorks Remote Web Console error codes for XP12000/XP10000 Disk Arrays and SVS200 (AE002-96034, October 2007)

Part
Code
Error
Number
Error M essage
Recommended Ac tion
Severit y
Level
Failure
Level
0605 56521
The licensed capacity of
some program products will
be insufficient because of
the Add Volume operation.
Increase the licensed
capacity for the program
products that do not have
sufficient licensed capacity ,
and then retry the operation.
E5
0605 56524
This function cannot be used
by the storage partition
administrator.
Select another window. To
setthisfunction,contactthe
storage a dministrator.
E
3
0605 56536
The licensed capacity
was exceeded because of
changing the configuration.
Please correct the licensed
capacity on the License Key
Partition Definition window.
Please correct the licensed
capacity with the License
Key Partition Definition
window.
W
5
0605 57101
An error occurred during
SVP processing. If this
problem persists, please call
technical suppor t.
If this problem persists, call
technical support.
E
2
0605
582 46
This function is not
supported.
Check the DKCMAIN
microcode version and the
SVP microcode version,
because these versions
might be mismatched.
E5
0605 58 247
VMA is set to the specified
P-VOL.
Check t
he setting of the
volume, and specify a
volume without the VMA
setting.
E5
0605 58 248
VMA is set to the specified
S-VOL.
Check the setting of the
volume, and specify a
volume without the VMA
setting.
E5
0605 58 249
The specified volume is
being used as a NAS user
volume.
Please recheck the specified
volume.
If th e specified volume is
correct, stop the NAS cluster
service, shut down the NAS
OS, and then retry the
operation.
W
5
06
05
58
251
The P-VOL and the S-VOL of
the Cross-system Copy pair
are b oth internal volumes.
Create a Cross-system Copy
pair using an external
volume and an internal
volume.
E5
0605 58 252
An internal volume and an
external volume whose IO
Suppression mode is set to
Disable are specified as the
P-VOL and the S-VOL of the
Cross-system Copy pair.
Specify an external volume
whose IO Suppression
mode is set to Enable.
E5
0605 58 253
An external volume whose
IO Suppression mode is set
to Disable and an internal
volume are specified as the
P-VOL and the S-VOL of the
Cross-system Copy pair.
Specify an external volume
whose IO Suppression
mode is set to Enable.
E5
Remote Web Console error codes
99