HP StorageWorks Remote Web Console error codes for XP12000/XP10000 Disk Arrays and SVS200 (AE002-96034, October 2007)

Part
Code
Error
Number
Error M essage
Recommended Ac tion
Severit y
Level
Failure
Level
0605
6534
The number of external
volumesthatcanbesetto
the subsystem exceeds the
maximum.
Please decrease the number
of external volumes and
retry the configuration
operation.
E5
0605 6535
You cannot make changes
because a logical path to
the volume still remains.
Please delete a logical path,
and then make configuration
changes.
E5
0605 6536
Thetargetvolumecannot
be changed due to its LUSE
configuration.
Please relea
se the LUSE
volume, and
then request
configurati
on changes
again.
E5
0605 6537
There is no error in this
setting.
There is no error in this
setting. However, there is
an error in another setting
in the Preset list. Remove
the factor(s) that caused the
error, and then retry the
operation.
W
0
0605 7310
This error code is not
registered.
If this problem persists, call
technical support.
E5
0605 8000
An error
occurred during
SVP processing. If this
problem persists, please call
technical suppor t.
Retry t
he operation. If
this pr
oblem persists, call
techni
cal support.
E
3
0605 8001
An error occurred during
SVP processing. If this
problem persists, please call
technical suppor t.
Retry the operation. If
this problem persists, call
technical support.
E
3
0605 8002
An error occurred during
SVP processing. If this
problem persists, please call
technical suppor t.
Retry the operation. If
this problem persists, call
technical support.
E
3
0605 8100
An e
rror occurred during
SVP processing. If this
problem persists, please call
technical suppor t.
If this problem persists, call
technical support.
E
2
0605 8102
This function is not
supported.
Check the DKCMAIN
microcode version and
the SVP microcode version
because these versions
might be mismatched.
E
3
0605 8122
This logical volume is busy.
Please wait for a while, and
then retry the operation.
E5
0605 8136
The command was rejected,
because the licensed
capacity was exceeded.
The currently licensed
capacity is insufficient.
To increase the licensed
capacity, buy a new license
key .
E5
0605
8140
This logical volume cannot
be selected because it
is used as a volume for
FlashCopy Mirror Version 2.
Please confirm, and operate
the volume again.
E5
Remote Web Console error codes
89