HP StorageWorks Remote Web Console error codes for XP12000/XP10000 Disk Arrays and SVS200 (AE002-96034, October 2007)

Part
Code
Error
Number
Error M essage
Recommended Ac tion
Severit y
Level
Failure
Level
0505 8310
The subsy stem status is
invalid. Please call technical
support.
Retry the same operation
several times. If this problem
persists, call technical
support.
E
2
0505 8401
The status of the subs ystem
requires maintenance (for
example, the subsystem is
blocked, the shared memory
is inconsistent, or some
other problem occurs).
Please call technical suppor t.
Please check the status of
the disk storage system (for
example, the storage system
is blocked, the shared
memory is inconsistent, or
some other problem occurs).
If this problem persists,
please call technical
support.
W6
0505
565 2 4
This funct
ion cannot be used
by the sto
rage partition
administ
rator.
Select another window. To
setthisfunction,contactthe
storage a dministrator.
E
3
0505
57004
The CLPR configuration
of the subsystem may
contain some inconsistent
information. Please change
the CLPR configuration.
Change the CLPR
configuration from the
Partition Definition window.
E
3
Table 21 Error Codes — Part Code 0507
Part
Code
Error
Number
Error M essage
Recommended Ac tion
Severit y
Level
Failure
Level
0507 5099
An error occurred during
SVP processing. If this
problem persists, please call
technical suppor t.
If this problem persists, call
technical support.
E
2
0507 6012
An error occurred during
SVP processing. If this
problem persists, please call
technical suppor t.
Ifthesameproblem
persists despite retrying,
call technical support.
E
2
0507 7070
An error occurred during
SVP processing. If this
problem persists, please call
technical suppor t.
Ifthesameproblem
persists despite retrying,
call technical support.
E
2
Table 22 Error Codes — Part Code 0510
Part
Code
Error
Number
Error M essage
Recommended Ac tion
Severit y
Level
Failure
Level
0510 9010
There is a charge for this
operation. Do you want to
continue?
If you want to continue the
operation, select the OK
button.
W
5
0510
59045
The detailed information
will be initialized by this
operation. Do you want to
continue?
To continue processing,
select [OK]. To stop
processing, select [Cancel].
W
0
Remote Web Console error codes
83